Home
Introduction
The SEM Bridge device is a hardware device that connects network cameras to Enterprise Manager.
Settings page
The Settings page displays configuration information and options for the SEM Bridge device.

Introduction
The SEM Bridge device is a hardware device that connects network cameras to Enterprise Manager.
- Supported hardware
  The SEM Bridge supports the following hardware.
- Run the setup wizard
  The setup wizard helps you configure your SEM Bridge device. The setup wizard runs automatically when you first turn on the SEM Bridge device, but you can also run the setup wizard at any time.
- Overview page
  The Overview page displays information about, and the health of, the SEM Bridge device.
- Settings page
  The Settings page displays configuration information and options for the SEM Bridge device.
- Log in to an SEM Bridge device
  You can use a browser to log in to the SEM Bridge Web interface.
Configuration
Configure the SEM Bridge device using the Settings page or running the Setup Wizard.
Update
You can update both the SEM Bridge firmware and the firmware for cameras attached to the SEM Bridge device.
Legal information
Copyright © 2018 Senstar Corporation and/or its Licensor(s). All rights reserved.

Settings page

The Settings page displays configuration information and options for the SEM Bridge device.

You can configure the SEM Bridge device on the settings page or use the setup wizard.

© Senstar Corporation