Aero- Add support for HID VertX V100, V200 and V300 Controllers
Considerations Prior to Setup
This guide will assist you in setting up the Aero X1100 intelligent controller and adding support for legacy HID VertX V100, V200 and V300 subcontrollers.
Make sure you add Symphony AC and all sub-folders files to the anti-virus exclusion list.
Port 3001 must be opened to allow communication between the Aero X1100controller and Symphony AC.
Adding a V100, V200, V300 controller under Aero X1100
From Hardware Tree pane, select the Aero Driver > then select Aero X1100 controller. In the Controller Properties, locate the 'Dialect' property and select 'VertX'
Then right-click the X1100 controller >Edit>Add Sub-Controller. In the New Sub-Controller window, select the appropriate VertX sub-controller type you want to add (V100, V200 or V300). Specify the correct Sub-controller Address. This value must match the physical controller addressing based off the dipswitch assignment. The first subcontroller Address must be 1 or higher. then Click on the Check Mark icon
The new subcontroller should now appear in the hardware tree and as well as in the Controller Status Screen
