Senstar
Safeguarding people, places and property
Contact       Xnet Login       English
Knowledge Base Article
Article Type: How To
Product: Symphony
Product Version:
Component: Symphony Server
Device Brands:
Created: 10-Feb-2016 3:43:25 PM
Last Updated:

Farm redundancy settings

The following are the configurable farm redundancy settings.

SettingDescription
FarmHealthStartDelayMsThis setting is how long (in milliseconds) that the Symphony Server waits after server startup before monitoring the Symphony Servers (buddy servers) in the farm.
FarmHealthSockTimeoutMs

This setting is the timeout (in milliseconds) for the UDP socket. Symphony uses UDP sockets to receive Alive messages from Symphony Servers (buddy servers) in the farm. Every server uses this timeout.

You should not have to change this.

FarmHealthMissedUdpMs

This setting is the amount of time (in milliseconds) that a Symphony Server can be down before it is determined down and failover occurs.

You might want to set this to several minutes to allow a Windows update reboot.

FarmHealthUdpPort

This is the port that Symphony uses for UDP messages.

Only change this setting if failover is not working and the infoservice log files indicate that there are port conflicts.

These settings are not in the database by default. To add them, use the following commands. The last parameter is the default used. You can also use the Manual Configuration Editor to set these values.

dbupdater "insert into Settings (Type,ID,Section,K,V) values ('Global','','Main','FarmHealthStartDelayMs',      '5000')"

dbupdater "insert into Settings (Type,ID,Section,K,V) values ('Global','','Main','FarmHealthSockTimeoutMs',  '1500')"

dbupdater "insert into Settings (Type,ID,Section,K,V) values ('Global','','Main','FarmHealthMissedUdpMs',   '30000')"

dbupdater "insert into Settings (Type,ID,Section,K,V) values ('Global','','Main','FarmHealthUdpPort',           '5045')"

Average rating:
Please log in to rate.
Rated by 0, Viewed by 2427